Pool Conditioner HRV

NORDIC® leads the way in Indoor Pool conditioning with this high-efficiency indoor pool HRV. This heat pump, which is not a geothermal heat pump, can be used in any home with an indoor pool.

Dehumidifies pool area
Rejects heat back into pool water or pool area air
Optional outdoor condenser available to enable air conditioning when the pool water is up to temperature
Air coils are coated for protection from the chlorinated air
R410a – Environmentally friendly refrigerant, will not cause depletion of our ozone layer
Titanium Pool Water Coil – for long service life
2” PVC water lines for full pass-through of pool circulator water

Capacity Rating

3 Ton (45-Series)

4 Ton (55-Series)

5 Ton (65-Series)

6 Ton (75-Series)

6.5 Ton (80-Series)

Fan Outlet

Bottom

Matching outdoor condenser?

SKU: 00-22* Categories: Pool Conditioning, Specialty Heat Pumps Tag: hydronic

Introducing: Pool Conditioner HRV dehumidification

This Pool Conditioner HRV dehumidification heat pump provides the required dehumidification for the pool area and then rejects the extracted heat from the humid air back either into the Air Stream, Pool Water or can be rejected into the outdoor air via an external outdoor condenser unit (optionally purchased with unit).
A single PC-Series heat pump can provide pool conditioning for indoor pools ranging approximately from 600 sqft pool surface area to 1,300 sqft.

The best way to dehumidify your indoor pool area

Our Pool Conditioner HRV dehumidification heat pump is uniquely designed for an indoor pool environment. It has coated air coils, a titanium exchanger and a stainless steel case. An electrically commutated (ECM) fan with several speed options is also standard. The motor has a soft start function for improved efficiency and reduced wear. This heat pump uses R410a refrigerant, which is an environmentally friendly refrigerant.

Geothermal not required

This Pool Conditioner heat pump is not a geothermal heat pump and does not require a ground loop. Homes with a geothermal, or ground source, heating system can consider using our W-Pool Series heat pump for pool water heating.

Weight	515 lbs
Dimensions	70 × 44 × 40 in
Refrigerant Type	R410a
Voltage	230-1-60
Fan Outlet	Bottom, Side, Top
Back-up Plenum Heater	None, 15 KW, 20 KW
Certifications	TUV