Introducing: High Temp WH-Series heat pump
The High Temp WH-Series heat pump Medium Capacity water-to-water heat pump produces hot water up to 160°F (71°C). It boosts temperatures of water that is pre-heated by other sources. This can be for example a conventional ground source water-to-water heat pumps an industrial process, or Solar Thermal applications.
As a result, the output temperatures are hot enough for Domestic Hot Water applications and/or baseboard or other heating distribution configurations that require water temperatures above 120F.
The heat pump’s heat source is clean incoming liquid that has been pre-heated to between 45°F (7°C) and 90°F (32°C). Usually this heat source comes from a buffer tank on the indoor side of a geothermal heat pump.
It can also come from a cooling loop in an industrial process. For example a Data Center or liquid cooled greenhouse. Using this pre-heated incoming liquid, our high temperature heat pump heats water to as high as 160°F (71°C).
Key Features and benefits
- Small Footprint – about 20″ x 41″ side by side configuration
- Electronic Expansion Valve – Ensures precise refrigerant control and maximizes system capacity.
- Refrigerant: R513a
- Compressor – Single stage scroll with crankcase heater
- Refrigerant Receiver – means 100% of condenser is available for use at all times, maximizing system capacity.
- Suction Accumulator – ensures liquid refrigerant cannot get back to compressor, for maximum compressor longevity.
- Cabinet – is powder coated satin galvanized steel, making it immune to corrosion.
- Gen2 Control Board – Includes built-in aquastat functionality, BACnet, laptop connectivity, data logging, electronic readout of refrigerant pressures and water in/out temperatures.
Temperature ranges
The SOURCE Side (or ground loop side) water temperature ranges between 45°F (7°C) and 90°F (32°C).
The LOAD Side (or Hot side) boosted water temperatures can reach up to 160°F (71°C) and should be a minimum of 20°F higher than the Source side. Consult the manual for details.
Incoming fluid too cold?
If you require up to 160°F (71°C) water temperatures directly from a closed ground loop source temperature as low as 30°F (-1°C), consider our Cascading WC-Series heat pump.












Reviews
There are no reviews yet.